Truncated Ball with Blind Hole
Hardened Stainless Steel, 58 HRC.
The truncated ball with a blind hole is a low-cost modified ball with high mounting strength. This version is usually pinned and glued to hold it in position. This design is often employed in production applications where large numbers of kinematic components require maximum economy. The reduced profile height, the added stability of the flat base and the higher load-carrying capacity are all good selling points for this design.
| Part No. |
A-Diameter ±.0001" |
B-Diameter Reference |
C-Height ±.002" |
E-Diameter |
F-Depth |
| 187-TB-BH |
0.1875"
4.763 mm |
0.1767"
4.488 mm |
0.125"
3.175 mm |
0.0625"
1.59 mm |
0.0625"
1.59 mm |
| 250-TB-BH |
0.250"
6.35 mm |
0.235"
5.97 mm |
0.167"
4.242 mm |
0.0625"
1.59 mm |
0.0625"
1.59 mm |
| 312-TB-BH |
0.3125"
7.9375 mm |
0.294"
7.468 mm |
0.208"
5.283 mm |
0.09375"
2.38 mm |
0.09375"
2.38 mm |
| 375-TB-BH |
0.3750"
9.525 mm |
0.353"
8.966 mm |
0.250"
6.35 mm |
0.125"
3.18 mm |
0.125"
3.18 mm |
| 500-TB-BH |
0.500"
12.700 mm |
0.471"
11.963 mm |
0.334"
8.484 mm |
0.15625"
3.97 mm |
0.15625"
3.97 mm |
| 625-TB-BH |
0.625"
15.875 mm |
|
|
|
|
| 750-TB-BH |
0.750"
19.05 mm |
0.707"
17.958 mm |
0.500"
12.70 mm |
0.15625"
3.97 mm |
0.15625"
3.97 mm |
| 100-TB-BH |
1.000"
25.4 mm |
0.866"
21.996 mm |
0.750"
19.05 mm |
0.1875"
4.76 mm |
0.1875"
4.76 mm |
See here for Truncated Balls prices.